Manufacturers Of
Foundry Equipments Like :
 
• Shell Sand Moulding Sand
• Green Moulding Sand
• No-Bake Moulding Sand
• Co2 Moulding Sand
 
  • 1
  • 2
  • 3
  • 4
  • 5
 
 
 
 
 
 
 
 
 
   
 
 

No Bake Moulding Sand :

EQUIPMENTS FOR STRUCTURAL PROPERTIES
 
 
SAND SAMPLER
   
   
 
 
USE : It is use to collect the representative sand sample.
Specifications : It consist of long pipe having one end Hard Tip with handle
 
 
 
 
SAND SPLITTER
   
   
 
 
USE : It is use to collect the representative sand sample with proper mixing.
Specifications : It consist of long pipe having one end Hard Tip with handle
 
 
 
 
SAND WASHER
   
   
 
  USE : It is use to find out clay % of raw sand.
Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm.
SAND WASHER
 
 
 
 
SAND SIEVER
   
   
 
  USE: It is use to find out AFS [Fineness No.] of sand
Specifications: Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.
SAND SIEVER
 
 
 
 
RAPID DRYER
   
   
 
 
USE : It is use to drying the sand sample.
Specifications : Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.
RAPID DRYER
 
 
 
 
SAND MIXER
   
   
 
 
USE : It is use to mixing for co 2 sand, two parts Nobake sand.
Specifications : Capacity - 10 Kg [Batch], Motor with Gear Box1/2 HP Single Phase, Scraper - 2 Nos.
SAND MIXER
 
 
 
 
SAND RAMMER
   
   
 
 
USE : It is use to prepare standard specimen for further test.
Specifications : - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.
SAND RAMMER
 
 
 
 

ATTACHMENTS TO SAND RAMMER

A

 Base Block

B

 Tensile Core Box

C

 Transverse Core Box

D

 Split Specimen Tube

 
 
UNIVERSAL STRENGTH MACHINE [HYDRAULIC]
   
   
 
 
USE : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specification: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2
On Compression Scale With Compression Pads
UNIVERSAL STRENGTH MACHINE
 
 
 
 
UNIVERSAL STRENGTH MACHINE [HYDRAULIC]
   
   
 
 
USE : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand.
Specifications: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell,
Digital Strength Indicator And Compression Pads
UNIVERSAL STRENGTH MACHINE
 
 
 

ATTACHMENTS TO STRENGTH MACHINE

A

 High Dry Strength Attachments

B

 Shear Strength Attachments

C

 Tensile Strength Attachments

D

 Transverse Strength Attachments

 
 
CORE HARDNESS TESTER
   
   
 
 
USE : It is use to determine surface hardness of Core Mould.
Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.
CORE HARDNESS TESTER
 
 
 
 
 
CORE GAS DETERMINATOR
   
   
 
 
USE : It is use to determine gas evolution in the shell sand.
Specification : Heater-1200 Watts, 230v.,A.C.Supply. With Furnace Of 1200 o c Cap., Digital Temp. Indicator-Controller, Combustion Tube, Boats, Pusher Measuring Tube.
 
 
 
 
GANG CORE BOX FOR COMPRESSION SPECIMEN
   
   
 
 
Use : It is used to prepare the standard specimen for compression
Specifications : consist of rubber boss with standard orifice
 
 
 
 
GANG CORE BOX FOR TENSILE SPECIMEN
   
   
 
 
Use : it is used to prepare the standard specimen for Tensile
Specifications : consist of instrument Clamping spring & 5nos standard wts.
GANG CORE BOX FOR TENSILE SPECIMEN
 
 
 
 
GANG CORE BOX FOR TRANCEVERSE SPECIMEN
   
   
 
 
Use: it is used to prepare the standard specimen for transverse
Specifications : consist of instrument Clamping spring & 5nos standard wts.
GANG CORE BOX FOR TRANCEVERSE SPECIMEN
 
 
 
 
CALIBRATION KIT
 
A.
SAND RAMMER
   
   
 
 
USE : It is use to prepare standard specimen for further test.
Specifications : - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.
SAND RAMMER
     
B.
USE: It is use to standardize Moisture Tester
Specifications : It consist Cap with master Gauge It is manufacturer Std.
 
     
C.
USE: It is use to standardize the Universal Strength Machine.
Specifications : 
UNIVERSAL STRENGTH MACHINE
     
  1) For Low Capacity: - it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2 .on compression  scale. Without NABL Calibration certificate  
     
  As above with NABL Calibration certificate  
     
  2) For High Capacity: - it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression  scale. Without NABL Calibration certificate  
     
  As above with NABL Calibration certificate  
     
D.
FOR PERMEABILITY METER
 
     
  Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice
 
     
E.
FOR MOULD AND CORE HARDNESS TESTER
 
 
USE : It is use to determine the mouldability index of green sand.
Specifications : Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve
CORE HARDNESS TESTER
 
 
 
 
Foundry Equipment
Sand Testing Equipment
metal testing eqipment