Manufacturers Of

Foundry Equipments Like :

• Shell Sand Moulding Sand
• Green Moulding Sand
• No-Bake Moulding Sand
• Co2 Moulding Sand

	All Products

	Shell Sand Moulding Sand


	Green Moulding Sand

	No-Bake Moulding Sand

	Co₂ Moulding Sand

	Photo Gallery

	New product Introduced

Green Moulding Sand :

	SAND SAMPLER

USE : It is use to collect the representative sand sample.
Specifications : It consist of long pipe having one end Hard Tip with handle

	SAND SPLITTER

USE : It is use to collect the representative sand sample with proper mixing.
Specifications : It consist of long pipe having one end Hard Tip with handle

	SAND WASHER

USE : It is use to find out clay % of raw sand.
Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm.

	METHYLENE BLUE CLAY TESTER

USE : It is use to find out active clay % of sand.
Specifications : Stirrer - Magnetic Type, Titration Stand, Burette -50 ml. , Methylene Blue Bottle.

	SAND SIEVER

USE: It is use to find out AFS [Fineness No.] of sand
Specifications: Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.

	RAPID DRYER

USE : It is use to drying the sand sample.
Specifications : Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.

EQUIPMENT FOR BENTONITE PROPERTIES

	LIQUID LIMIT

USE : It is use to find out liquid limit of Bentonite.
Specifications : Includes Rubber Base, Sliding Carriage, Metallic Bowl, Gauge Block And Grooving Tool

EQUIPMENTS FOR SAND PREPARATION

	SAND MULLER

USE: It is use to mixing mulling purpose of Green Sand
Specifications: Capacity - 5 Kg [Batch], Motor with Gear Box 1/2 HP Single Phase, Scraper, Roller - 2 Nos.
two ploughs, water sprinkling system

EQUIPMENTS FOR VARIOUS PROPERTIES OF GREEN SAND

	RAPID MOISTURE TESTER

USE : It is use to determine moisture % in Raw sand and Green sand.
Specifications : Capacity 10 % Moisture With Single Pan Balance, Absorbent Compound And Carrying Case

	SAND RAMMER

USE : It is use to prepare standard specimen for further test.
Specifications : - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

ATTACHMENTS TO SAND RAMMER

A		Mold Permeability Tester
B		Core Permeability Tube
C		Base Permeability Tube

	UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

USE : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specification: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2
On Compression Scale With Compression Pads

	UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

USE : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand.
Specifications: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell,
Digital Strength Indicator And Compression Pads

ATTACHMENTS TO STRENGTH MACHINE

A		Shear Strength Attachments
B		Splitting Strength Attachments
C		Twin Transverse Strength Attachments
D		Deformation Attachments

	GREEN COMPRESSION STRENGTH MACHINE

USE : It is use to determine Compression strength of Green sand
Specifications : with spring balance (0-2500 gm/cm 2 ), tray

	MOULD STRENGTH TESTER

USE : It is use to determine compression strength of Mould.
Specification : With Dial Indicator with Special Tip to Measure Compression Strength on direct Mould. Capacity 2 Kg/cm 2

	MOULD STRENGTH TESTER

USE : It is use to determine surface hardness of Green Mould.
Specification : Dial Indicator To Measure Hardness of Mould 0 - 100 No.

	MOULD HARDNESS TESTER (DIGITAL) (‘B' SCALE)

USE : It is use to determine surface hardness of Green Mould.
Specification : Digital Dial Indicator To Measure Hardness of Mould 0 - 100 No.

	CORE HARDNESS TESTER

USE : It is use to determine surface hardness of Core Mould.
Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.

	CORE HARDNESS TESTER

USE : It is use to determine the mouldability index of green sand.
Specifications : Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve

	SHATTER INDEX TESTER

USE : To determine the Shatter Index of moulding sand.
Specification : Pillar, Top Housing Bracket, Anvil, 12.5 mm Sieve, Lid, pan

	WET TENSILE TESTER

Use : It is use to determine wet tensile strength of green sand.
Specifications : - Suitable For Wet Tensile Strength of green sand. Capacity 60 gm/Cm 2 Motorized Loading unloading Mechanism, Load Cell, pneumatic cylinder hot plate for heat the specimen up to 300 o C Digital Strength Indicator. Timer, Working on 230 volt, 50 cycles, 750 watts Power Supply.

Calibration Kit

A.	SAND RAMMER

USE : It is use to prepare standard specimen for further test.
Specifications : - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

USE: It is use to standardize Moisture Tester
Specifications : It consist Cap with master Gauge It is manufacturer Std.

1)For Low Capacity : it consists of Force easuring Devicehaving capacity 0 to 4 kg/cm 2 on compression scale. Without NABL Calibration certificate

As above with NABL Calibration certificate

2) For High Capacity : it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression scale. Without NABL Calibration certificate

As above with NABL Calibration certificate

	FOR PERMEABILITY METER

Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

	FOR MOULD AND CORE HARDNESS TESTER

Use: it is used to standardize the mould & core hardness tester
Specifications : consist of instrument Clamping spring & 5 nos standard weights.