foundry-machines-sand-metal-testing-equipments
arrow

Shell Sand Moulding

Sand Sampler

USE : It is use to collect the representative sand sample.
Specifications : It consist of long pipe having one end Hard Tip with handle

Sand Splitter

USE : It is use to collect the representative sand sample with proper mixing.
Specifications : It consist of long pipe having one end Hard Tip with handle


Sand Washer

USE : It is use to find out clay % of raw sand.
Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm.

sand_washer
Sand Siever

Use : It is use to find out AFS [Fineness No.] of sand
Specifications : Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.

sand_siever

Rapid Dryer

Use : It is use to drying the sand sample.
Specifications : Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.

rapid_dryer.gif
Cold Tensile Attachment To H.T.S. Machine

Use : To Prepare the standard specimen
Specification : Contains standard specimen Jaw

cold_shell_tensile.gif

Rapid Moisture Tester

Use : It is use to determine moisture % in Raw sand and Green sand.
Specifications : Capacity 10 % Moisture With Single Pan Balance, Absorbent Compound And Carrying Case

Peel Back Tester [Digital]

Use : It is use to determine pill of f and build up property of shell sand.
Specification : Heater -1000 Watts, 230V A.C. Supply. With Digital Temp. Indicator Cum Controller, Heating Plate, Funnel, Two Trays


Stick Point Tester

Use : It is use to determine melting point of Resin Coated Sand.
Specification : With Heating Unit, Sand Distributor Digital Temperature Indicator And Controller, Brush.

stick_point_tester
Peel Back Tester

Use : It is use to determine Pill Off and Build Up property of shell sand.
Specification : Heater - 1000 Watts, 230v.A.C. Supply. With Thermostat, Heating Plate, Funnel, Two Trays

peel_back_tester

Core Gas Determinator

Use : It is use to determine gas evolution in the shell sand.
Specification : Heater-1200 Watts, 230v., A.C.Supply. With Furnace Of 1200 o c Cap., Digital Temp. Indicator-Controller, Combustion Tube, Boats, Pusher Measuring Tube.

Hot Air Blower Mixture (Mini Coating Plant For Shell Sand)

Use : It is use to prepare shell sand in hot condition to check the resin properties under standard condition.
Specification : Mixture – Cap. - 5Kg [Batch], Motor with Gear Box1/2 HP Single Phase, Scraper - 2 Nos., window to see the inside process Heating unit – 6 kw, Blower – ¼ hp single phase, 230 AC volts.


Core Hardness Tester

Use : It is use to determine surface hardness of Core Mould.
Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.

core_hardness
Transverse Strength Tester ( Digital )

Use : It is use to determine Transverse Strength of resin coated sand.
Specifications : Suitable For Transverse Strength. Capacity 100 Kg/Cm 2 . Motorized Loading unloading Mechanism, Load Cell, Digital Transverse Strength Indicator. Suitable for specimen size 1/4X 1” X4”

transverse

Shell Transverse Specimen Curing Accessory

Use : it is used to prepare the standard specimen for transverse strength of resin coated sand.
Specifications : Split Core Box To Prepare Transverse Specimens of 1/4X 1” X4” size with help of Hot Tensile Tester

Shell Transverse Specimen Curing Accessory

Use : It is use to determine to measure the distortions behavior of chemically bonded sand when exposed to heat.


Hot Tensile Tester

Use : It is use to determine Tensile Strength of shell sand in hot condition.
Specification :
1) Teflon coated Two Hot Plates, Controlled By Digital Temperature Indicator And Controller (0-300 o c).
2) Loading and unloading mechanisms operated by manually and auto by electronic control.
3) Digital Pressure Indicator to read tensile strength up to 55 kg/cm 2 .
4) Load Cell.
5) Hard crome plated tensile Jaw set.
6) Waste sand collection tray.
7) Jaw Lifting tongue.
8) Sand Filler Cum Scrapper
9) Cleaning Brush.
10) Working on 230 volt, 50 cycle, 1.6 Kw AC Power Supply

hot_shell_tensile
Calibration Kit

A. FOR HOT TENSILE TESTER
Use : It is use to standardize the pressure indicator and temperature indicator of Hot Tensile Tester.
Specifications : 1) It Consist plate with wire rope and hanger & temp indictor cum controller Calibrator at two different point
2) It require set of weights 20kg, 10kg & 5kg - 2 Nos.

hot_shell_tensile

B. FOR MOULD AND CORE HARDNESS TESTER
Use : it is used to standardize the mould & core hardness tester
Specifications : consist of instrument Clamping spring & 5nos standard weights.

core_hardness



Green Moulding Sand :

Methylene Blue Clay Tester

Use : It is use to find out active clay % of sand.
Specifications : Stirrer - Magnetic Type, Titration Stand, Burette -50 ml. , Methylene Blue Bottle.


methyelene-blue
Liquid Limit

Use : It is use to find out liquid limit of Bentonite.
Specifications : Includes Rubber Base, Sliding Carriage, Metallic Bowl, Gauge Block And Grooving Tool

liquid-limit

Sand Muller

Use : It is use to mixing mulling purpose of Green Sand
Specifications : Capacity - 5 Kg [Batch], Motor with Gear Box 1/2 HP Single Phase, Scraper, Roller - 2 Nos. two ploughs, water sprinkling system

sand-muller
Sand Rammer

Use : It is use to prepare standard specimen for further test.
Specifications : With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

sand-rammer

Universal Strength Machine [Hydraulic]

Use : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specifications : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment,
Capacity : For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2 On Compression Scale With Compression Pads

universal
Universal Strength Machine [Hydraulic]

Use : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand.
Specifications : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell, Digital Strength Indicator And Compression Pads

universal-strength

Green Compression Strength Machine

Use : It is use to determine Compression strength of Green sand
Specifications : with spring balance (0-2500 gm/cm 2 ), tray

transverse
Mould Hardness Tester (Digital) (‘B' Scale)

Use : It is use to determine surface hardness of Green Mould.
Specifications : Digital Dial Indicator To Measure Hardness of Mould 0 - 100 No.

mould_hardness_tester

Mould Strength Tester

Use : It is use to determine compression strength of Mould.
Specifications : With Dial Indicator with Special Tip to Measure Compression Strength on direct Mould. Capacity 2 Kg/cm 2

Mould Strength Tester

Use : It is use to determine surface hardness of Green Mould.
Specifications : Dial Indicator To Measure Hardness of Mould 0 - 100 No.


Core Hardness Tester

Use : It is use to determine surface hardness of Core Mould.
Specifications : Harden Tip, to Measure Hardness of Cores 0 To 100 No.

core_hardness
Core Hardness Tester

Use : It is use to determine the mouldability index of green sand.
Specifications : Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve

core_hardness

Shatter Index Tester

Use : To determine the Shatter Index of moulding sand.
Specifications : Pillar, Top Housing Bracket, Anvil, 12.5 mm Sieve, Lid, pan


satter
Wet Tensile Tester

Use : It is use to determine wet tensile strength of green sand.
Specifications : Suitable For Wet Tensile Strength of green sand. Capacity 60 gm/Cm 2 Motorized Loading unloading Mechanism, Load Cell, pneumatic cylinder hot plate for heat the specimen up to 300 o C Digital Strength Indicator. Timer, Working on 230 volt, 50 cycles, 750 watts Power Supply.

wet_tensile_tester

A. Sand Rammer

Use : It is use to prepare standard specimen for further test.
Specifications :With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

sand-rammer
B. Sand Rammer

Use : It is use to standardize Moisture Tester
Specifications :With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

C. Sand Rammer

Use : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specifications : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity : For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2 On Compression Scale With Compression Pads

universal

For Permeability Meter

Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

For Mould And Core Hardness Tester

Use : it is used to standardize the mould & core hardness tester
Specifications : consist of instrument Clamping spring & 5 nos standard weights.

core_hardness



No Bake Moulding Sand

Core Gas Determinator

Use : It is use to determine gas evolution in the shell sand.
Specifications : Heater-1200 Watts, 230v., A.C.Supply. With Furnace Of 1200 o c Cap., Digital Temp. Indicator-Controller, Combustion Tube, Boats, Pusher Measuring Tube.

Gang Core Box For Compression Specimen

Use : It is used to prepare the standard specimen for compression
Specifications : consist of rubber boss with standard orifice


Gang Core Box For Tensile Specimen

Use : it is used to prepare the standard specimen for Tensile
Specifications : consist of instrument Clamping spring & 5nos standard wts.

tensile_core_box
Gang Core Box For Tranceverse Specimen

Use : it is used to prepare the standard specimen for transverse
Specifications : consist of instrument Clamping spring & 5nos standard wts.

transverse_gang_core

A. Sand Rammer

Use : It is use to prepare standard specimen for further test.
Specifications :With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

B. Sand Rammer

Use : It is use to standardize Moisture Tester
Specifications :It consist Cap with master Gauge It is manufacturer Std.

E. For Mould And Core Hardness Tester
Use : It is use to determine the mouldability index of green sand.
Specifications : Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve

sand-rammer
C. Sand Rammer

Use : It is use to standardize the Universal Strength Machine.
Specifications : 1) For Low Capacity : it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2 .on compression scale. Without NABL Calibration certificate As above with NABL Calibration certificate
2) For High Capacity : it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression scale. Without NABL Calibration certificate As above with NABL Calibration certificate

D. For Permeability Meter
Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

universal

A. Sand Rammer

Use : It is use to standardize Sand Rammer
Specifications :It consist precisian specimen tube, Height Gauge 50mm. with NABL Accreditation Lab certificate

C. As above with NABL Calibration certificate
For Permeability Meter Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

D. For Permeability Meter
Use : it is used to standardize the mould & core hardness tester
Specifications : consist of instrument Clamping spring & 5 nos standard weights.

sand-rammer

core_hardness
B. For Strength Machine

Use : It is use to standardize the Universal Strength Machine.
Specifications :1) For Low Capacity : it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2. on compression scale. Without NABL Calibration certificate As above with NABL Calibration certificate
2) For High Capacity : it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression scale. Without NABL Calibration certificate