Manufacturers Of
Foundry Equipments Like :
 
• Shell Sand Moulding Sand
• Green Moulding Sand
• No-Bake Moulding Sand
• Co2 Moulding Sand
 
 
 
 
 
 
 
 
 
 
   
 
 

Co2 Moulding Sand :
EQUIPMENTS FOR STRUCTURAL PROPERTIES
 
 
SAND SAMPLER
   
   
 
 
USE : It is use to collect the representative sand sample.
Specifications : It consist of long pipe having one end Hard Tip with handle
 
 
 
 
SAND SPLITTER
   
   
 
 
USE : It is use to collect the representative sand sample with proper mixing.
Specifications : It consist of long pipe having one end Hard Tip with handle
 
 
 
 
SAND WASHER
   
   
 
  USE : It is use to find out clay % of raw sand.
Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm.		 SAND WASHER
 
 
 
 
SAND SIEVER
   
   
 
  USE: It is use to find out AFS [Fineness No.] of sand
Specifications: Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.		 SAND SIEVER
 
 
 
 
RAPID DRYER
   
   
 
 
USE : It is use to drying the sand sample.
Specifications : Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.
RAPID DRYER
 
 
 
 
SAND MIXER
   
   
 
 
USE : It is use to mixing for co 2 sand, two parts Nobake sand.
Specifications : Capacity - 10 Kg [Batch], Motor with Gear Box1/2 HP Single Phase, Scraper - 2 Nos.
 SAND MIXER
 
 
 
 
SAND RAMMER
   
   
 
 
USE : It is use to prepare standard specimen for further test.
Specifications : - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.
 SAND RAMMER
 
 
 

ATTACHMENTS TO SAND RAMMER

A

 Base Block

B

 Tensile Core Box

C

 Transverse Core Box

D

 Split Specimen Tube

E
CO 2 GASSING ACCESSORY FOR COMPRESSION SPECIMEN
 
USE: It is a accessory to passing the co 2 gas In Standard Specimen.
Specifications: - Specimen Holder With Gas Sealing Facility.
F
CO 2 GASSING ACCESSORY FOR TENSILE SPECIMEN
 
USE: It is a accessory to passing the co 2 gas In Tensile Specimen.
Specifications: - Tensile Specimen Holder With Gas Sealing Facility
G
CO 2 GASSING ACCESSORY FOR TRANSVARSE SPECIMEN
 
USE: It is a accessory to passing the co 2 gas In Transverse Specimen.
Specifications : -Transverse Specimen Holder With Gas Sealing Facility.
 
 
PERMEABILITY TESTER
   
   
 
 
USE : It is use to determine porosity in Raw sand, Green, Nobake sand.
Specifications :- With Air Tank, Water Tank, Manometer Unit, Permeability Chart, 2 Orifices And Syphon Unit
 
 
 
 
PERMEABILITY TESTER [ELECTRIC]
   
   
 
 
USE : It is use to determine porosity in Raw sand, Green & Nobake sand
Specifications : electric blower, Speed Regulator, Pressure Gauge, 2 Orifices
 PERMEABILITY TESTER
 
 
 

ATTACHMENTS TO PERMEABILITY TESTER

A

 Mold Permeability Tester

B

 Core Permeability Tube

C

 Base Permeability Tube

•

UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

 

USE : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specification: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2 On Compression Scale With Compression Pads

 
 
UNIVERSAL STRENGTH MACHINE [MECHANICAL AND DIGITAL]
   
   
 
 
USE : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand.
Specifications : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell, Digital Strength Indicator And Compression Pads
 UNIVERSAL STRENGTH MACHINE
 
 
 

ATTACHMENTS TO STRENGTH MACHINE

A

 High Dry Strength Attachments

B

 Shear Strength Attachments

C

 Tensile Strength Attachments

D

 Transverse Strength Attachments
 
 
CORE HARDNESS TESTER
   
   
 
 
USE : It is use to determine surface hardness of Core Mould.
Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.
CORE HARDNESS TESTER
 
 
 
CORE GAS DETERMINATOR
CALIBRATION KIT
 
A.
SAND RAMMER
   
   
 
 
USE: It is use to standardize Sand Rammer
Specifications : It consist precisian specimen tube, Height Gauge 50mm. with NABL Accreditation Lab certificate
 SAND RAMMER
     
B. FOR STRENGTH MACHINE  
     
 
USE: It is use to standardize the Universal Strength Machine.
Specifications : - 1) For Low Capacity: - it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2.
on compression scale. Without NABL Calibration certificate As above with NABL Calibration certificate
2) For High Capacity: - it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression scale. Without NABL Calibration certificate
  
     
C.
As above with NABL Calibration certificate
  
     
  FOR PERMEABILITY METER  
     
  Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice		  
     
D.
FOR PERMEABILITY METER
 
 
Use : it is used to standardize the mould & core hardness tester
Specifications : consist of instrument Clamping spring & 5 nos standard weights.
 CORE HARDNESS TESTER
 
 
 
Foundry Equipment
Sand Testing Equipment